Polaris 2008 RZR Service Manual page 128

ELECTRONIC FUEL INJECTION
8. Remove the (2) fasteners from the rear seat base and
remove the assembly from the vehicle.
9. Remove the (11) push rivets and (4) Torx screws retaining
the RH rocker panel and remove panel from the vehicle.
Remove
RH Rocker Panel
10. Remove the lower bolt retaining the seat belt mechanism
near the rear RH portion of the fuel tank. Once removed,
place the mechanism in the rear cargo box to keep it out of
the way.
4.24
11. Remove the (3) Torx fasteners from the rear RH fender well
and remove the fender well from the vehicle.
NOTE: Lift fender well up over the fuel tank filler
neck and out from the vehicle.
IMPORTANT: Take care not to place any excessive
force on the filler neck
12. Remove the (2) tank bracket fasteners that retain the fuel
tank in the chassis.
Tank Bracket
Fasteners
13. Lift the rear of the fuel tank up first and carefully pull it out
from the vehicle.