Daikin SkyAir GQI-Eco Series Service Manual page 23

SiBE281013
1.2.2 BRC1E51A7
1. Operation mode selector button
2. Fan speed control button
3. Menu/Enter button
4. Up button
5. Down button
6. Right button
7. Left button
Remote Controller
Press this button to select the operation mode of your preference.
*Available modes vary with the connecting model.
Press this button to select the fan speed of your preference.
*Available fan speed vary with the connecting model.
Used to indicate the main menu.
Used to enter the setting item selected.
(Be sure to press the part with the symbol
Used to raise the set temperature.
The next items on the upper side will be highlighted.
(The highlighted items will be scrolled continuously when the button is kept pressed.)
Used to change the item selected.
(Be sure to press the part with the symbol
Used to lower the set temperature.
The next items on the lower side will be highlighted.
(The highlighted items will be scrolled continuously when the button is kept pressed.)
Used to change the item selected.
(Be sure to press the part with the symbol
Used to highlight the next items on the right-hand side.
Each screen is scrolled in the right-hand direction.
Home leave settings are enabled with this button kept pressed for at least four seconds.
(Be sure to press the part with the symbol
Used to highlight the next items on the left-hand side.
Each screen is scrolled in the left-hand direction.
Home leave settings are enabled with this button kept pressed for at least four seconds.
Wired Remote Controller
1. Operation mode
selector button
11. LCD (with backlight)
4. Up button
5. Down button
6. Right button
7. Left button
9. Operation lamp
8. On/Off button
3. Menu/Enter button
10. Cancel button
2. Fan speed control button
)
)
)
)
13