Daikin SkyAir GQI-Eco Series Service Manual page 64

Field Setting from Remote Controller
2.1.2 BRC1E51A7
(1)
(2)
In the case of individual
setting per indoor unit
(3)
(4)
(5)
54
<Basic screen>
<Field setting menu screen>
Press Menu/Enter button.
<Field setting screen>
In the case of group total
(3)
(5)
Second Code No.
First Code (SW) No.
Press Menu/Enter button.
1
Press and hold Cancel button for 4
seconds or more.
Field setting menu is displayed.
2
Select
setting menu, and press Menu/Enter
button.
Field setting list screen is
3
Highlight the mode, and select desired
"Mode No." by using
button.
4
In the case of setting per indoor unit
during group control (When Mode No.
such as
selected), highlight the unit No. and
select "Indoor unit No." to be set by
using
case of group total setting, this
operation is not needed.)
In the case of individual setting per
indoor unit, current settings are
displayed. And, Second Code No.
" - " means no function.
5
Highlight Second Code No. of the First
Code No. to be changed, and select
desired "Second Code No." by using
setting
identical mode number settings are
available.
In the case of group total setting, all
of Second Code No. which may be
set are displayed as " ∗ ".
" ∗ " is changed to Second Code
No. to be set. And, Second Code
No. " - " means no function.
SiBE281013
Field setting list in the field
displayed.
(Up/Down)
20 , 21 , 22 , 23
(Up/Down) button. (In the
(Up/Down) button. Multiple
Field Setting
, 25 are