Daikin SkyAir GQI-Eco Series Service Manual page 24

Wired Remote Controller
8. On/Off button
9. Operation lamp (Green)
10.Cancel button
11.LCD (with backlight)
14
Press this button and system will start.
Press this button again and system will stop.
This lamp lights up during operation.
This lamp blinks if an error occurs.
Used to return to the previous screen.
The backlight will be light for approximately 30 seconds by pressing any operation button.
Operate buttons excluding the On/Off button while the backlight is lit.
If two remote controllers are used to control a single indoor unit, the backlight of the remote
controller operated earlier than the other one will be lit.
SiBE281013
Remote Controller