Ordering Replacement Parts - GREAT PLANES RV-4 Instruction Manual

This is a number four screw that is 1-1/2" [38mm] long
with forty threads per inch.
When you see the term test fit in the instructions, it
•
means that you should first position the part on the
assembly without using any glue, then slightly modify or
custom fit the part as necessary for the best fit.
• Whenever the term glue is written you should rely upon
your experience to decide what type of glue to use. When a
specific type of adhesive works best for that step, the
instructions will make a recommendation.
• Whenever just epoxy is specified you may use either
30-minute (or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
Photos and sketches are placed before the step they
•
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
• The RV-4 ARF is factory-covered with Top Flite
MonoKote ® film. Should repairs ever be required, MonoKote
can be patched with additional MonoKote purchased
separately. MonoKote is packaged in six-foot rolls, but some
hobby shops also sell it by the foot. If only a small piece of
MonoKote is needed for a minor patch, perhaps a fellow
modeler would give you some. MonoKote is applied with a
model airplane covering iron, but in an emergency a regular
iron could be used. A roll of MonoKote includes full
instructions for application. Following are the colors used on
this model and order numbers for six foot rolls.
White – TOPQ0204
Aluminum – TOPQ0205
Black – TOPQ0208
Metallic Red – TOPQ0405
• The stabilizer and wing incidences and engine thrust
angles have been factory-built into this model. However,
some technically-minded modelers may wish to check these
measurements anyway. To view this information visit the web
site at www.greatplanes.com and click on "Technical Data."
Due to manufacturing tolerances which will have little or no
effect on the way your model will fly, please expect slight
deviations between your model and the published values.

ORDERING REPLACEMENT PARTS

Replacement parts for the Great Planes RV-4 ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose "Where to Buy" at the bottom
of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
number and expiration date for payment.
Mail parts orders and payments by personal check to:
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
®
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact Product
Support by e-mail at productsupport@greatplanes.com,
or by telephone at (217) 398-8970.
Description
Missing pieces
Instruction manual
Full-size plans
Kit parts listed below
Replacement Parts List
GPMA3030 ..............Wing Set
GPMA3031 ..............Wing Tube
GPMA3032 ..............Fuse w/Hatch
GPMA3033 ..............Wheel Pants
GPMA3034 ..............Cowl
GPMA3035 ..............Landing Gear Set
GPMA3036 ..............Spinner w/Hardware
GPMA3037 ..............Canopy
GPMA3038 ..............Tail Set
GPMA3039 ..............Decal Sheet
5
® or MasterCard
Hobby Services
How to Purchase
Contact Product Support
Contact Product Support
Not available
Hobby Supplier
®