Table of Contents
Advertisement
Optional Supplies and Tools
Here is a list of optional tools mentioned in the manual that
will help you build the Fling 2M ARF.
❏
Great Planes Plan Protector
❏
Great Planes 2 oz. [57 g] Spray CA activator (GPMR6035)
❏
Great Planes mixing cups (GPMR8056)
❏
Great Planes epoxy brushes (6, GPMR8060)
❏
Hobbico builder's triangle set (HCAR0480)
❏
Great
Planes
cement (GPMR6060)
❏
Denatured alcohol (for epoxy clean up)
❏
Top Flite
®
Panel Line Pen (TOPQ2510)
❏
Hobbico Z-bend pliers (HCAR2000)
❏
Great Planes AccuThrow
❏
Great Planes CG Machine
IMPORTANT BUILDING NOTES
Whenever just epoxy is specified you may use either
•
30-minute (or 45-minute) epoxy or 6-minute epoxy. When
30-minute epoxy is specified it is highly recommended that
you use only 30-minute (or 45-minute) epoxy, because you
will need the working time and/or the additional strength.
•
Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
•
The stabilizer and wing incidences have been factory-
built into this model. However, some technically-minded
modelers may wish to check these measurements anyway.
To
view
this
information
www.greatplanes.com and click on "Technical Data." Due
to manufacturing tolerances which will have little or no effect
on the way your model will fly, please expect slight
deviations between your model and the published values.
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes Fling 2M ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose "Where to Buy" at the bottom
of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
™
(GPMR6167) or wax paper
Threadlocker
™
thread-locking
™
deflection gauge (GPMR2405)
(GPMR2400)
™
visit
the
web
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
number and expiration date for payment.
Mail parts orders and payments by personal check to:
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason contact Product
Support by e-mail at productsupport@greatplanes.com, or by
telephone at (217) 398-8970.
Replacement Parts List
Order Number
GPMA2715
GPMA2716
GPMA2717
GPMA2718
GPMA2719
COMMON ABBREVIATIONS
site
at
METRIC CONVERSIONS
1/64"
=
1/32"
=
1/16"
=
3/32"
=
1/8"
=
5/32"
=
3/16"
=
1/4"
=
3/8"
=
1/2"
=
5/8"
=
4
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Description
Missing pieces
Instruction manual
Full-size plans
Wing Set
Fuselage
Tail Set
Canopy
Decal Sheet
Fuse = Fuselage
Stab = Horizontal Stabilizer
Fin = Vertical Fin
LE = Leading Edge
TE = Trailing Edge
LG = Landing Gear
Ply = Plywood
" = Inches
mm = Millimeters
SHCS = Socket Head Cap Screw
1" = 25.4 mm (conversion factor)
.4 mm
.8 mm
1.6 mm
2.4 mm
3.2 mm
4.0 mm
4.8 mm
6.4 mm
9.5 mm
12.7 mm
15.9 mm
®
or MasterCard
®
How to Purchase
Contact Product Support
Contact Product Support
Not available
Contact Hobby Supplier
Contact Hobby Supplier
Contact Hobby Supplier
Contact Hobby Supplier
Contact Hobby Supplier
3/4"
=
19.0 mm
1"
=
25.4 mm
2"
=
50.8 mm
3"
=
76.2 mm
6"
= 152.4 mm
12"
= 304.8 mm
18"
= 457.2 mm
21"
= 533.4 mm
24"
= 609.6 mm
30"
= 762.0 mm
36"
= 914.4 mm
Advertisement
Table of Contents
