OPTIMOD-PC
You can set these functions separately on the Processor mixer and the Di-
rect Mixer. The two mixers will behave independently according to their
individually set programming.
If both "backup for digital 1" and "mute" are selected, the backup func-
tion will override the mute function.
Output and Routing Switcher Setup
The three-switch output routing switcher determines the feed to:
•
The OPTIMOD-PC card's stereo analog output
•
The OPTIMOD-PC card's two AES3 digital outputs, which emit identical sig-
nals in v1.0 software.
•
The WAVE input to the computer.
Each output can receive any of the following four sources:
•
The WAVE output from the computer
•
The output of the direct mixer
•
The output of the OPTIMOD-PC audio processing that follows all processing
Figure 2-10: Output Levels Page in I/O Mixer
2-31
INSTALLATION