OPTIMOD PC
(flow control = none).
A) Connect an RS232 serial port (COM port) on your computer to a serial port on
the 1101's host computer.
You do not need to remove power from either your computer or the
1101 when you do this.
B) Start HyperTerminal. (You can usually access it from Start / Programs / Acces-
sories / Communication.)
The N
C
EW
ONNECTION
C) Give your new connection a name and choose OK.
The C
ONNECT
D) Set the Connect Using field to "COMx," where "x" is the COM port you are
using on your PC.
Choose OK.
The P
S
ORT
E) Set the port properties as follows:
Bits per second ..........115200
Data Bits.....................8
Parity .........................none
Stop bits .....................1
Flow control...............none
dialog box appears.
T
dialog box appears.
O
dialog box appears.
ETTINGS
6-9
CONTROL API