Table of Contents
Advertisement
OPTIMOD-PC
the card resides, (2) the port that was assigned to the Optimod Cards running on
the remote computer, and (3) the User or Administrator password of each card.
To add cards, you must be able to connect to the Orban server software on the
remote computer containing those cards. That is, the remote computer must be
on-line and connected to the network, and the Orban server software on that
computer must be running. If you are using a modem connection, this connec-
tion must already be established.
The Orban server software will be running if the remote computer is
turned on, you have installed your card and driver on that computer, the
OPTIMOD-PC Control software is installed on that computer, and the "Al-
low Network to Access Local Cards" box in S
page 2-8) is selected on a card in that system.
Orban server software does not have to be running on your local com-
puter.
A) Add a remote computer to the list of available computers containing
OPTIMOD-PC cards:
a) Select C
ONNECT
The
C
ARDS
pears.
b) Enter the Profile Name,
IP Address, and Port of
the remote computer
The Profile Name can
be any name you wish
to use—for example,
"Boston." The profile
name is known only to
your local computer.
The network identifies
a given computer by its
IP address and port,
not its profile name.
The profile name is merely a convenient alias that you use to help iden-
tify a remote computer hosting OPTIMOD-PC cards without your having
to memorize the computer's IP address.
B) Add the remote computer's cards to the list of cards that you can access:
You must have the User Passwords of all cards you wish to add.
a) Click A
DD
The
A
DD
opens.
b) Enter the card's User Password into
the P
ASSWORD
c) Click E
NTER
/A
.
DD
A
P
/
DD
ROFILE
menu
ap-
(
)
S
.
dialog box
P
/C
ROFILE
ARD
field.
to confirm your entry.
(step 7.E) on
S
ERVICE
ETUP
2-11
INSTALLATION
Advertisement
Table of Contents
