Table of Contents
Advertisement
2-10
INSTALLATION
8. Edit the local OPTIMOD-PC server's network accessibility, port numbers,
and Service Security Password. (optional)
A) If the OPTIMOD-PC application is currently connected to a card, disconnect it
by choosing D
ISCONNECT
B) Navigate to
T
> S
OOLS
ERVICE
C) Enter the Service Security Pass-
word that you originally set in
step (7.I) on page 2-9.
The Service Setup Window ap-
pears.
D) Edit parameters in this window as
desired. Then click OK. (See step 7 on page 2-7.)
9. Edit a given card's name and/or passwords. (optional)
A) Connect to the local card to which
you are assigning a name and
password.
B) From the Tools menu bar, choose
"Administration."
The Enter Administrator Password
window appears. Enter the card's
Administrator password and hit En-
ter.
If you did not enter an Administrator Password in step (6.E), you will not
see the "Enter Administrator Password" dialog box and the Card and Se-
curity Administration window will appear immediately.
C) The Card and Security Administration window opens. Edit the fields as re-
quired. (See Figure 2-5 on page 2-7.)
D) Click "Save" to confirm your changes.
10. Add remote cards to your list of available cards. (optional)
To maintain security, all OPTIMOD-PC cards in the remote machines on your net-
work are initially hidden from the Orban Control application on your computer.
You must explicitly "add" each card that you wish to control locally. To do so,
you must know three things: (1) the IP address of the remote computer in which
from the C
ONNECT
S
.
ETUP
ORBAN MODEL 1101
menu.
Advertisement
Table of Contents
