Distortion Control - Orban Optimod-PC 1101 Operating Manual

3-38
OPERATION

Distortion Control

AGC Matrix allows you to operate the AGC in left/right mode or in sum / difference
mode. Usually you will operate in left/right mode. However, sum / difference mode
can give a type of stereo enhancement that is different from the enhancement
modes offered in OPTIMOD-PC's built-in stereo enhancer. This will only work if you
allow the two channels of the AGC to have different gains. To do this, set the AGC
M D GR control greater than zero.
AX ELT
AGC Max Delta GR determines the maximum gain difference permitted between
the two channels of the AGC. Set it to "0" for perfect stereo coupling.
This control works the same regardless of whether the AGC operates in
left/right or sum / difference M
maximum gain difference between the "channels." Depending on the
M mode setting, the "channels" will handle left and right signals or
ATRIX
will handle sum and difference signals. When the AGC operates in sum /
difference M
of width change in the stereo soundfield.
Master Delta Threshold allows you to set the difference between the compression
thresholds of the sum and difference channels. (This control is only useful when you
set the AGC M to
ATRIX
lower than the sum channel, you can have the AGC automatically produce more
gain reduction in the difference channel. This will reduce the separation of material
with an excessively wide stereo image (like old Beatles records). To make this work,
you must set the M
AX
cessively wide image while preventing more than 3 dB difference in gain between
the sum and difference channels, set the M
M D T
ASTER ELTA HRESHOLD
automatic width control you want OPTIMOD-PC to perform.
Bass Delta Threshold works the same as M
the bass band. You will usually set it the same as M
The distortion control adjustments are common to the Two-Band and Five-Band
structures except as noted in the descriptions on the following pages.
Bass Clip Threshold controls
S B C T
PEECH ASS LIP HRESHOLD
when OPTIMOD-PC automatically detects speech (page 3-5).
The bass clipper is embedded in the multiband crossover so that harmonics created
by clipping are rolled off by part of the crossover filters. The threshold of this clipper
is ordinarily set between 0 dB and 6 dB below the threshold of the look-ahead lim-
iter, depending on the setting of the L
which you are basing your Advanced Control adjustments. This provides headroom
for contributions from the other four bands so that bass transients don't smash
ATRIX
mode, this control determines the maximum amount
ATRIX
.) By setting the threshold of the difference channel
/
SUM DIF
GR control away from zero. For example, to limit an ex-
D
ELTA
control to some positive number, depending on how much
Orban's patented embedded bass clipper. The
control overrides the B
-M
ESS
modes, in both cases controlling the
D GR control to 3.0 and the
AX ELTA
D T
ASTER ELTA HRESHOLD
D T
ASTER ELTA HRESHOLD
C T
ASS LIP HRESHOLD
control in the parent preset upon
ORE
ORBAN MODEL 1101
, but applies to
.
control