Table of Contents
Advertisement
2-8
INSTALLATION
B) Navigate to
T
> S
S
OOLS
ERVICE
ETUP
C) Set the "Application Control
Setup" port through which
the
OPTIMOD-PC
Application
running
networked computers can
access
the
OPTIMOD-PC
Service running on your local
computer.
The OPTIMOD-PC Service
allows you to access all
cards on a given com-
puter through the same
port.
The default port is 11100.
If a given computer also
has
OPTIMOD-PC
cards installed, you must
assign the 1101 and 1100
cards
different
numbers
to
conflicts.
D) Set the "Terminal Control
Setup" port through which
the OPTIMOD-PC Control Application running on networked computers can
access the OPTIMOD-PC TCP/IP terminal server to allow external control of the
OPTIMOD-PC cards from either a Telnet/SSH client or a custom third party ap-
plication. See Optimod-PC System/Mixer Control API on page 6-1.
The default port is 11101. If a given computer also has OPTIMOD-PC 1100
cards installed, you must assign the 1101 and 1100 cards different port
numbers to prevent conflicts.
E) Set A
N
LLOW
ETWORK TO
By default, this box is not checked. When it is not checked, no card in
your computer can be accessed through the OPTIMOD-PC Control Appli-
cation running on the network.
Before you check this box, be sure that you have assigned a password to
each OPTIMOD-PC card in your computer (step 6 on page 2-6).
F) If you wish to allow only specified computers to access local cards via the
OPTIMOD-PC Control Application, check the Application Control Setup U
N
A
L
ETWORK
CCEPT
IST
The Network Accept List adds another layer of security beyond password
security. It is not strictly necessary to use this feature if you have assigned
passwords to all cards in your computer.
a) Click the N
ETWORK
b) Click the A
button.
DD
Control
on
1100
port
prevent
A
L
C
CCESS
OCAL
ARDS
.
A
L
button.
CCEPT
IST
ORBAN MODEL 1101
as appropriate.
SE
Advertisement
Table of Contents
