Table of Contents
Advertisement
OPTIMOD-PC
Q) For a 44.1 kHz output sample rate, set the digital output level to –0.5dBfs; this
will prevent overshoots caused by sample rate conversion. For a 48 kHz output
sample rate, set the digital output level to –0.1dBfs.
At 44.1 kHz, the output samples are not exactly the same ones that the
look-ahead limiter controlled at the internal 48 kHz sample rate, so slight
overshoot can occur. At 48 kHz output sample rate, overshoot will be less
than 0.1dB.
Creating Custom "Factory" Presets
You can create custom "factory" presets that support L
These presets will behave like Orban's factory presets.
Your 1101's software has the ability to interpolate all 19 available L
ments (1.0 through 10.0) from two or more L
tion, there must be a "factory preset" file. The instructions below show you how to
create these files from user preset files that you have saved.
In the examples below, the specified file locations are based on OPTIMOD-PC's de-
fault locations. Using Windows Explorer, check the factory preset file locations on
your computer to find out where these files are actually located. You must place
your new "factory preset" files in analogous locations.
To create a custom "factory" preset:
1. Choose a name for the preset.
You cannot use the name of an existing factory preset without damaging it. We
will use "My Preset" as the preset name in the examples below.
2. Create a folder for your presets.
Create a folder named "My Preset" within the directory
\Program Files\Orban\OPTIMOD-PC2\presets
You should see all of the subdirectories for Orban's factory presets in this
director
3. Choose the default L
4. Using the OPTIMOD-PC Control Application, create user presets for each
L
-M
anchor point.
ESS
ORE
See User Processing Presets starting on page 1-11.
Because L
-M
ESS
set of equalizer settings for your new preset that is the same for all anchor pre-
-M
value for your preset.
ESS
ORE
works only on the dynamics processing, you must choose a
ORE
-M
ESS
"anchor" preset files. In addi-
-M
ESS
ORE
OPERATION
functionality.
ORE
-More incre-
ESS
3-57
Advertisement
Table of Contents
