283.03 Sensor (buffer path) static jam
Step
Check
1
Check the sensor (buffer path) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch FINISHER TESTS.
3. Touch Sensor Test.
4. Touch Media Path 1.
5. Touch Buffer path.
Does the display on the operator panel change every
time the sensing area of the above sensor is
interrupted or blocked?
2
Check the sensor (buffer path) for proper connection.
Is the above component properly connected?
3
Check the drive motor (buffer/transport) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Motor Tests.
4. Touch Motor (buffer/transport).
Does the above component operate properly?
4
Check the drive motor (buffer/transport) for proper
connection.
Is the above component properly connected?
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Yes
No
Go to step 3.
Go to step 2.
Replace the
Replace the
sensor (buffer
connection.
path).
Go to
"Sensor
(buffer path)
removal" on
page
4-92.
Go to step 5.
Go to step 4.
Replace the drive
Replace the
motor (buffer/
connection.
transport).
"Drive
Go to
motor (buffer/
transport) and
belt (buffer/
transport)
removal" on
page
4-113.
Diagnostic information
7500-XXX
2-21