Sensor (Booklet Rear Tamper Hp) Removal - Lexmark X850e Service Manual

7500-XXX
5. Remove sensor (booklet front tamper HP) (A).
A
Left
Connector

Sensor (booklet rear tamper HP) removal

1. Remove the booklet unit assembly. See "Booklet unit assembly removal" on page 4-122.
2. Remove the booklet unit assembly left cover. See "Booklet unit assembly left cover" on page 4-129.
3. Disconnect the connector from the booklet left tamper sensor.
4. Remove the screw securing the sensor (booklet rear tamper HP) bracket from the booklet unit assembly.
4-133
Repair information