7500-XXX
Stacker media bin assembly removal
1. Release the two hooks securing the stacker media bin assembly (A) to the finisher.
2. Lift the stacker media bin assembly (A) upward.
3. Remove the stacker media bin assembly. (A).
Right lower low voltage power supply (LVPS) cover removal
1. Remove the two screws securing the right lower LVPS cover (A) to the finisher.
2. Remove the right lower LVPS cover (A).
Replacement note: Make sure to put the power cord (B) into the notch on the right lower LVPS cover (A).
4-22
MFP Finisher Service Manual
A
B
Notch
A