Sensor (Media Compiler In) Lag Jam - Lexmark X850e Service Manual

Step Check
9 Perform a print test.
Does the error remain?

285.00 Sensor (media compiler in) lag jam

Step Check
1 Check the media eject clamp motor for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch Finisher Motor Tests.
4. Touch Media eject clamp motor.
Does the above component operate properly?
2
Check the media eject motor for proper connection.
Is the above component properly connected?
3 Check the compiler media in actuator for proper
operation.
Is the actuator operating properly?
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Yes No
Replace the Problem solved.
finisher controller
card assembly.
Go to "Finisher
controller card
assembly
removal" on
page 4-116.
Yes No
Go to step 3. Go to step 2.
Replace the Replace the
media eject connection.
motor.
Go to "Media
eject motor
assembly
removal" on
page 4-78.
Go to step 4. Replace the
media compiler
unit assembly.
Go to
compiler unit
assembly
removal" on
page
Diagnostic information
7500-XXX
"Media
4-69.
2-27