Stapler Unit Assembly Removal - Lexmark X850e Service Manual

7500-XXX

Stapler unit assembly removal

1. Remove the finisher front door assembly. See
2. Remove the staple cartridge.
3. Remove the rear upper cover. See
4. Remove the rear lower cover. See
5. Remove the stapler unit frame. See
6. Remove the five screws securing the stapler unit frame (A) to the plate (B).
7. Remove the stapler unit frame (A).
8. Release the harness from the three clamps on the stapler unit frame (A).
9. Remove the two screws securing the stapler carriage motor assembly (C) to the stapler carriage
assembly (D).
10. Remove the stapler carriage motor assembly (C).
4-56
MFP Finisher Service Manual
"Finisher front door assembly removal" on page
"Rear upper cover removal" on page
"Rear lower cover removal" on page
"Stapler unit frame removal" on page
A
C
Clamp
4-24.
4-23.
4-54.
B
4-27.