Sensor (Stapler Carriage Hp) Removal - Lexmark X850e Service Manual

7500-XXX

Sensor (stapler carriage HP) removal

1. Remove the finisher front door assembly. See
2. Remove the staple cartridge.
3. Remove the rear upper cover. See
4. Remove the rear lower cover. See
5. Remove the stapler unit frame. See
6. Remove the stapler unit assembly. See
7. Release the hooks securing the sensor (stapler carriage HP) (A) to the stapler carriage assembly (B).
8. Remove the sensor (stapler carriage HP) (A).
4-58
MFP Finisher Service Manual
"Rear upper cover removal" on page
"Rear lower cover removal" on page
"Stapler unit frame removal" on page
"Stapler unit assembly removal" on page
B
"Finisher front door assembly removal" on page
A
4-27.
4-24.
4-23.
4-54.
4-56.