7500-XXX
7. Remove the booklet media pinch roll assembly (A).
Booklet paddle motor removal
1. Remove the booklet unit assembly. See
2. Remove the booklet unit assembly left cover. See
3. Disconnect the connectors from the booklet paddle motor (A).
4. Remove the two screws securing the booklet paddle motor (A) from the compiler frame.
5. Remove booklet paddle motor (A).
Booklet end guide drive motor removal
1. Remove the booklet unit assembly. See
2. Remove the booklet unit assembly left cover. See
3. Disconnect the connectors from the sensor (booklet end guide drive motor).
4. Remove the two screws securing the booklet end guide drive motor (A) from the compiler frame.
4-142
MFP Finisher Service Manual
B
A
"Booklet unit assembly removal" on page
"Booklet unit assembly left cover" on page
Left
"Booklet unit assembly removal" on page
"Booklet unit assembly left cover" on page
4-122.
A
Connector
4-122.
4-129.
4-129.