Finisher Diverter Gate Removal - Lexmark X850e Service Manual

7500-XXX

Finisher diverter gate removal

1. Open the finisher front door assembly.
2. Remove the rear upper cover. See
3. Open the lower pinch guide assembly (A) to the right.
4. Open the upper pinch guide assembly (B) to the right.
5. Remove the finisher diverter gate solenoid. See
page 4-101.
6. Remove the link (C).
7. Move the finisher diverter gate (D) toward the rear, to the right, and forward, as shown.
B
Front
D
8. Remove the finisher diverter gate (D).
4-90
MFP Finisher Service Manual
"Rear upper cover removal" on page
A
"Finisher diverter gate solenoid removal" on
Rear
4-24.
D
C