7500-XXX
Booklet unit assembly removal
1. Open the finisher front door assembly.
2. Slide the booklet unit out.
3. Release the two latches securing the booklet unit (A) from the guides.
4. Remove booklet unit (A).
Booklet folding/exit drive motor assembly removal
1. Remove the booklet unit assembly. See
2. Disconnect the connectors from the booklet unit motor assembly (A).
3. Remove the five screws securing the booklet folding/exit drive motor assembly (A) from the booklet gear
train frame.
4. Remove the booklet folding/exit drive motor assembly (A).
4-122
MFP Finisher Service Manual
A
"Booklet unit assembly removal" on page
4-122.