Receiver// Us-36G2 - JTS US-36G2 Instruction Manual

5. Preparing Procedures & Basic Operation
5-1 Receiver // US-36G2
(1) Power output connector
Plug in one end of AC/DC adaptor cable to DC input socket in the rear panel of receiver, and
plug another end into an AC outlet.(Step 1)
(2) Audio Output Connector
Connect one end of the AF output cable to the AF output socket in the rear panel, then plug
another end to the "MIC IN" input socket of a mixer or amplifier.(Step 2)
Receiver equipped with balanced XLR output and Unbalanced φ6.3mm output, choose the
proper way for use.
AC/DC ADAPTOR
AC POWER SOCKET
MIXER
AUDIO OUTPUT
500
DC INPUT
2
1
1856
14