Conformity And Approval; Connecting The Receiver - JTS E-7HHSETD/ 5 Instruction Manual

2 if a defect might have occurred after a
device was dropped or suffered a similar
accident,
3 if malfunctions occur
Any repairs must be carried out by specialists
•
For cleaning the product only use a dry, soft
cloth; never use water or chemicals
•
No guarantee claims for the product and no
liability for any resulting personal damage
or material damage will be accepted if the
product is not correctly used or not expertly
repaired
If the product is to be put out of opera-
tion definitively, dispose of the product
in accordance with local regulations
3 Applications
This set is a wireless audio transmission system
that is ideal for speech and vocal applications
(e g for school lessons or presentations) The
configuration of the set varies depending on
the model:
Model Receiver
1-channel
E-7BPSET/ 5
receiver
2-channel
E-7BPSETD/ 5
receiver
1-channel
E-7HHSET/ 5
receiver
2-channel
E-7HHSETD/ 5
receiver
The audio transmission system operates in the
UHF range 506 – 542 MHz 16 preset frequencies
are available
Hint: The transmitters are also available as individual
items E-7TB / 5 (pocket transmitter incl lavalier micro-
phone) and E-7TH / 5 (wireless hand-held microphone)
This way, each system can be extended by one or more
transmitters (e g to be able to use either a pocket
transmitter or a hand-held microphone)
10
Transmitter
Pocket transmitter with
lavalier microphone
2 pocket transmitters, each
with a lavalier microphone
Wireless hand-held
microphone
2 wireless hand-held
microphones

3.1 Conformity and approval

Herewith, MONACOR INTERNATIONAL declare
that the products E-7BPSET/ 5, E-7HHSET/ 5,
E-7BPSETD/ 5 and E-7HHSETD/ 5 comply with
the directive 2014 / 53 / EU The EU declarations
of conformity are available on the Internet:
www jts-europe com
Restrictions or requirements apply in the
following countries:
CZ
IT
The regulations of the country where the prod-
ucts are operated must always be observed
Prior to operating the products, please contact
the MONACOR subsidiary or the corresponding
authorities of the respective country Links to
the national authorities can be found via the
following Internet address:
www cept org
tECC
tTopics
tOther spectrum topics: SRD Regulations and
indicative list of equipment sub-classes
tEFIS and National Frequency Tables

4 Connecting the Receiver

1) Connect the audio output AF OUTPUT (9)
to an audio input of the following device
(e g mixer, amplifier): either to a line level
input (possible marking of the input: "Line",
"Aux", "CD", "Tape", "Tuner") or to a
microphone input To reduce the output
level if the audio output is connected to a
microphone input, set the switch OUTPUT
LEVEL (8) to the position "−20 dB"
Note: The output is balanced, but when the cable
with two 2-pole 6 3 mm plugs (supplied with the
system) is used, the connection is unbalanced If
the input on the following device is balanced, a
balanced connection is also possible: To do this,
use a cable with 3-pole plugs instead of the cable
provided (e g for an XLR input, use a cable with
a 3-pole 6 3 mm plug and an XLR plug) Balanced
signal transmission will improve the noise immunity
of a connection which is a particular advantage
with long cables
EL FI FR
LT MT PL