Frequent Paper Jams - Riso ComColor 9050 Troubleshooting Manual

Frequent Paper Jams

If paper jams occur frequently, check the following points again.
• The paper on the standard tray or in the feed tray is within the maximum load capacity.
• The standard tray paper guides are positioned correctly and the paper is loaded properly.
• The paper that is actually loaded matches [Feed tray] settings.
• The useable paper is loaded.
Wrinkled or curled paper, in particular, can cause paper jams, so do not use this paper.
• When using irregular size paper, the paper size must be registered in advance using the administrator settings. Contact
your administrator.
• When using paper already printed on one side or dark colored paper, the machine may incorrectly detect this type of
paper as though multiple sheets of paper are being fed. Set [D-Feed Check] to [OFF].
⇒ Printer mode screen
[OFF]
⇒ Copy mode screen
[Basic]
to [OFF]
For details on how to load paper and the types of usable paper, see "Paper and originals" in the "Basic
Guide".
[Functions] [Feed tray] select the feed tray
[Feed tray] select the feed tray
[Paper type] set [D-Feed Check] to
[Change] [Paper type] set [D-Feed Check]
ComColor Series Troubleshooting Guide 01
2
2-3