Chapter 3 Maintenance; Replacing The Staple Cartridge; Replacing The Ur1 Staple Cartridge - Riso ComColor 9050 Troubleshooting Manual

Chapter 3 Maintenance

Replacing the Staple Cartridge

When there are no more staples, printing stops and a message appears on the touch panel.
Check the message, and then use the following procedure to replace the staple cartridge.

Replacing the UR1 Staple Cartridge

The message may appear even if there are
staples remaining. You can replace the staple
cartridge even if there are staples remaining.
The remaining staples can be used.
1
Open the cover.
2
Remove the staple cartridge by holding
the cartridge handle and pulling the
staple cartridge toward you while slightly
lifting it.
3
Press the parts on the staple cartridge
indicated with arrows, open the staple
cartridge cover, and remove the staple
case.
4
Insert a new staple case into the staple
cartridge.
5
Remove the tape from the staple case.
ComColor Series Troubleshooting Guide 01
3
3-1