A Staple Is Caught Inside The Machine - Riso ComColor 9050 Troubleshooting Manual

A staple is Caught Inside the Machine

If a staple becomes caught inside the machine, use the
following procedure to remove the staple.
Case of the UR1 staple cartridge
●
1
Open the cover.
2
Remove the staple cartridge by holding
the cartridge handle and pulling the
staple cartridge toward you while slightly
lifting it.
3
Open the staple cartridge cover and
remove the jammed staple.
CAUTION
When removing the staple, be careful not to injure
your fingers.
2-18
4
If the jammed staple cannot be removed,
push the bottom of the staple cartridge in
the direction of the arrow to remove the
staple.
5
Return the staple cartridge to its original
position.
Push in the staple cartridge until it clicks.
6
Close the cover.
ComColor Series Troubleshooting Guide 01