How To Load The Paper - Toshiba e-Studio287cs User Manual

How to Load the Paper

•
How to Load the Paper
Loading the paper in the
drawer cassette
Plain paper is the only type of paper that can be
loaded in the drawer cassette.
Follow this procedure to load the paper in the
1
drawer cassette. After you have loaded the
paper, configure the paper type and thickness by
using the operator panel.
1
Flex the stack of paper back and
forth a few times. Then, make a neat
2
stack by straightening its edges
against a level surface.
3
2
Open the drawer cassette.
4
5
Note
•
Do not remove the cork that is attached to the plate.
3
Adjust the paper guide and paper
6 stop to fit the paper size, and make
sure they are secure.
Paper Stop
Paper Guide
Paper Guide
- 62 -
4
The side that you want to print on
should be placed face down when
loading the paper.
5
Check the paper guide, and make
sure that the paper is secure.
Paper
Guide
6
Rotate the paper size dial until it
displays the size of the paper you
have loaded.
Note
•
Match the orientation of the loaded paper.
Paper Size Dial