Toshiba e-Studio287cs User Manual page 43

Memo
•
In the [Name] box, the device name that you
selected in the list is automatically displayed.
•
The way to select the PPD file differs depending on
countries or regions as follows:
-
For North America
Even when you select the equipment from the
list, the correct PPD file is not selected in the
[Print Using] box. Therefore, select [Other] in the
[Print Using] box, and select the PPD file TOSHIBA
ColorMFP-X7 from the [/Library/Printers/PPDs/
Contents/Resources/en.lproj] folder.
-
For the UK
When you select the equipment from the list,
the correct PPD file is automatically selected in
the [Print Using] box. If the correct PPD is not
automatically selected, select [Select a driver to
use] and choose the PPD file displayed in the list.
4
Click [Add].
The [Installable Options] window appears.
5
Set the following options.
•
Model Selection
TOSHIBA e-STUDIO407CSSeries
— Choose this for using
e-STUIDO287CS/407CS/347CS.
•
Finisher
Not Installed — Select this if a finisher is
not installed.
Inner Finisher (1 Tray) — Select this
when the Inner Finisher is installed.
Note
•
Even if you choose [Not Installed] for the Finisher
option during print settings, the finisher options such
as stapling can be selected. If you select the finisher
options for printing but the finisher is not installed,
finisher settings will be ignored and printing will be
performed correctly.
•
Drawers
Drawer 1
Select this when the drawer 1 is installed.
Drawer 1 and 2
Select this when the drawer 1 and 2 are
installed.
Drawer 1, 2 and 3
Select this when the drawer 1, 2 and 3 are
installed.
Drawer 1, 2, 3 and 4
Select this when the drawer 1, 2, 3 and 4
are installed.
6
Click [OK].
The printer is added to the Printer List.
- 43 -
Installing Additional Drawer Units
1
2
3
4
5
6