Configuring The Drawer Cassette - Toshiba e-Studio287cs User Manual

Configuring the drawer cassette

Match the drawer cassette to the loaded paper. Refer to the following table and configure paper type and
thickness by using the operator panel.
Complete the settings by pressing the [USER FUNCTION] button, and then [DRAWER] - [PAPER TYPE].
Paper Type Paper Thickness
Plain Paper 64-82g/m
83-105g/m
106-128g/m
129-200g/m
Envelope -
Label 0.1 to 0.17 or less.
0.17-0.2mm
: This is configured to [Plain Paper] at the time of shipment from the factory.
*1
: You can configure the paper thickness and paper type by using the operator panel or the printer
*2
driver. If you use the printer driver, the printer driver settings take precedence. If [Automatic
Selection] is selected as the [Paper Source] of the printer driver or [Printer Settings] is selected as
the [Paper Thickness], the operator settings take precedence.
: The printable thickness for duplex printing is 64 to 105 g/m2 (ream weight 50 to 90 kg).
*3
: No setting is required for envelopes.
*4
Memo
•
If paper thickness is set to Ultra Heavy 1 or Ultra Heavy 2 and paper type is set to [Label], the printing speed becomes
slower.
Setting value for the operator
Paper Thickness
(55-70kg) Plain Paper
2
(71-90kg) Heavy Paper
2
(91-110kg) Ultra Heavy 1 Paper
2
(111-172kg) Ultra Heavy 2 Paper
2
-
Ultra Heavy 1 Paper
Ultra Heavy 2 Paper
panel
Paper Type*
Plain Paper
-
Label
- 67 -
Setting of the
[Paper Thickness]
of the Printer
1
Driver:*
2
Plain Paper
Heavy Paper
Ultra Heavy 1 Paper
Ultra Heavy 2 Paper
-
Label 1
Label 2
1
2
3
4
5
6