Drawer Unit - Toshiba e-Studio287cs User Manual

4
Attach the additional drawer and
spacer to the caster unit.
(1)
Insert the posts of the cabinet to the
bottom holes of the drawer.
(2)
Fix the drawer with the joint-
option and tighten the screws
with the screw-knob.
Screw-Knob
Tighten them on the both sides.
5
Put the machine on the additional

drawer unit.

CAUTION
May cause injury!
•
At least three people are needed to
safely lift the machine due to its 50 kg
weight.
Drawers
Spacer
Post
Joint-
Option
- 35 -
Installing Additional Drawer Units
(1) Align the rear sides of the
machine and the additional
drawer unit and place the
machine quietly.
(2)
Fix the additional drawer unit
with the joint-option, and tighten
the screw with the screw-knob.
Joint Option
Screw Knob
(3)
Press down the lock levers of the
additional drawer unit's front
casters and lock the casters.
Note
•
For prevention of fall, note the following points in
transporting the equipment and printing.
1
2
3
4
5
6