Placing Paper And Originals - Toshiba e-STUDIO 206L Quick Start Manual

Placing Paper and Originals

This section explains how to set paper and originals. Incorrect setting causes image skews or paper jams. Follow the
procedure below.
Placing paper
1
Pull out the drawer and place paper face up.
2
2
Set the end guide so that it matches the paper
size.
3
2
Set the side guides so that they match the paper
size.
2
1
1
1

Placing Paper and Originals

4
Push in the drawer.
Be careful not to catch your fingers when pushing the
drawer back.
This could injure you.
Be sure that the height of the stacked paper does not
exceed the MAX line indicated on the side guides.
• For paper available for the equipment, see the following
page:
& P.74 "Specifications of Equipment" in this manual
• Paper can be placed in the Paper Feed Pedestal (optional)
and the Additional Drawer Module (optional) following
the above procedure. For placing paper in the Large
Capacity Feeder (optional), refer to the following guide:
& Copying Guide (PDF): "Chapter 1: BEFORE USING
EQUIPMENT" - "Placing Paper"
1
15