Toshiba e-Studio287cs User Manual page 34

Installing Additional Drawer Units
3
Attach the caster unit.
Note
•
When the casters are not used, this step is not
necessary.
(1)
Attach the anti-tip feet (both
sides and front) with four
screws.
Note
1
•
Attachment directions are different for the left side
and the right side.
2
3
(2)
Put the bottoms of the anti-tip
feet (both sides) on the floor,
align the sides to the cabinet
and tighten them with the two
screws each.
Screw Hole
4
5
Note
•
Do not tighten the upper screws.
6
Screw Hole
(3) Tighten the anti-tip foot covers
(both sides) and anti-tip feet
with two screws each.
(4) Align the anti-tip foot cover
(rear) to the rear side of the
anti-tip foot.
(5) Put the bottoms of the anti-tip
feet on the floor and tighten
them with three screws.
Attach the screw in the middle of the
oval cutout and tighten the screw.
- 34 -