Toshiba e-Studio287cs User Manual page 37

Memo
•
When SNMP communication between this equipment and
your computer is enabled, you can retrieve the option
configuration information by clicking [Update Now].
Q Configuring options manually
If SNMP communication between this equipment
and your computer is not available:
Setting the [Device Settings] tab
manually
Note
•
You need to log in to Windows with the "Administrator"
privilege.
1
Click [Start] menu and select
[Devices and Printers].
The Printers folder appears.
2
Select the printer driver for this
equipment, and then click [Printer
properties] in the [File] menu.
The printer driver properties dialog box appears.
•
If the [File] menu is not displayed, press
[Alt].
•
If the dialog box displayed does not
allow the printer driver properties to be
changed, follow the procedure below.
-
For Windows 7, some tab menus
have a
properties. To change the properties,
click on it. If the properties cannot
be changed, ask your network
administrator.
•
To change a network-installed printer
driver, the administrator privilege is
necessary. Ask your network administrator
for details.
3
Display the [Device Settings] tab
menu, and set the following options.
Model Selection — This sets the model type.
The setup items of the printer driver are changed
according to the model selected.
Note
•
If you select [Universal], you can narrow down
the setup items of the printer driver to those used
commonly in all of the e-STUDIO Series. It is
convenient in such cases as when you are using a
printer driver already installed to other e-STUDIO
Series models.
Option — This option sets whether the following
optional devices are installed.
•
Drawers — This sets whether or not the Paper
Feed Unit or Large Capacity Feeder is installed.
•
Finisher — This sets whether or not the Inner
Finisher is installed.
- 37 -
Installing Additional Drawer Units
button in the printer driver
1
2
3
4
5
6