Paper Recommendations - Toshiba e-Studio287cs User Manual

Q Paper Recommendations
Your machine will handle a variety of print
media, including a range of paper weights and
sizes.
This section provides general advice on choice of
media, and explains how to use each type.
The best performance will be obtained when
using standard 75 - 90 g/m2 paper designed for
use in copiers and laser printers.
Use of heavily embossed or very rough textured
paper is not recommended.
Pre-printed stationery can be used, but the ink
must not offset when exposed to the high fuser
temperatures used in the printing process.
Envelopes should be free from twist, curl or
other deformations. They should also be of the
rectangular flap type, with glue that remains
intact when subjected to hot roll pressure fusing
used in this type of machine. Window envelopes
are not suitable.
Labels should also be of the type recommended
for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels.
Other types of label stock may damage the
machine due to the labels peeling off during the
printing process.
- 57 -
About Paper
1
2
3
4
5
6