Toshiba e-Studio287cs User Manual page 40

Installing Additional Drawer Units
Q Configuring LPR printing
1
Open System Preferences and click
[Print & Scan].
1
2
2
Click [+].
3
4
3
Click [IP] and specify the items as
described below.
5
6
Protocol: Line Printer Daemon - LPD
Address: <IP address or DNS name of this
equipment>
Queue: print
Name: <Any Name>
Location:
<Any Name>
Print Using: TOSHIBA ColorMFP-X7
Memo
•
For MAC OS X 10.4.x to 10.6x, select TOSHIBA
ColorMFP-X4.
•
In the [Name] box, the name that is entered in the
[Address] box is automatically displayed.
•
The way to select the PPD file differs depending on
countries or regions as follows:
-
For North America
Even when you enter the IP address or DNS name
of this equipment in the [Address] box, the correct
PPD file is not selected in the [Print Using] box.
Therefore, select [Other] in the [Print Using] box,
and select the PPD file TOSHIBA ColorMFP-X7 from
the [/Library/Printers/PPDs/Contents/Resources/
en.lproj] folder.
-
For the UK
When you enter the IP address or DNS name of
this equipment in the [Address] box, the correct
PPD file is automatically selected in the [Print
Using] box. If the correct PPD is not automatically
selected, select [Select a driver to use] and
choose the PPD file displayed in the list.
4
Click [Add].
The [Installable Options] window appears.
5
Set the following options.
•
Model Selection
TOSHIBA e-STUDIO407CSSeries
— Choose this for using
e-STUIDO287CS/407CS/347CS.
•
Finisher
Not Installed — Select this if a finisher is
not installed.
Inner Finisher (1 Tray) — Select this
when the Inner Finisher is installed.
Note
•
Even if you choose [Not Installed] for the Finisher
option during print settings, the finisher options such
as stapling can be selected. If you select the finisher
options for printing but the finisher is not installed,
finisher settings will be ignored and printing will be
performed correctly.
- 40 -