Pioneer PD-F907 Operating Instructions Manual

Pioneer PD-F907 Operating Instructions Manual

File-type compact disc player
Hide thumbs Also See for PD-F907:

Advertisement

D
FILE-TYPE
COMPACT DISC PLAYER
◊Û¿X/?≥
Î
ACSESS
SINGLE
PLAY
LOADER
POWER
STANDBY / ON
POWER ON DEMO display mode allows you
to see variations of the display. To enter the
POWER ON DEMO display mode, press
STANDBY/ON and then 4 1 within 1 sec-
ond after turning on the power.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in a
safe place for future reference.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
This player is for consumer use. If the player is used in a business
(for example, used for a long period at a restaurant), the player will
not be covered under warranty.
CD Video, VIDEO CD, CD graphics, DVD and CD-ROM discs can
not be played with this player.
FILE-TYPE COMPACT DISC PLAYER
◊Û¿X/?≥
MODE
'
UNLOAD
FILE -TYME CD MECHANISM
OPEN/
CLOSE
POWER ON DEMO display
DISC
TRACK
MIN
SEC
CUSTOM ALL
RANDOM REPEAT 1 REMAIN PGM
I II III SINGLE
PREVIOUS DISC SCAN
BEST
HI-LITE
CLEAR
PROGRAM
RANDOM
REPEAT
BEST
PREVIOUS
DISC
6
7
41
¡¢
1-BIT DLC
DIRECT LINER CONVERSION
To cancel the POWER ON DEMO display
mode, press any button.
CONTENTS
BEFORE YOU USE THE PLAYER ....................................... 4
CAUTIONS REGARDING HANDLING ................................. 5
CONNECTIONS .................................................................. 6
NAMES OF PARTS ............................................................. 7
HOW TO LOAD THE DISCS ............................................... 9
To listen in order from the first track ............................. 10
To select the disc and track .......................................... 10
To select a play mode ................................................... 10
Playing a disc in the Single Loader slot ......................... 11
To start playback from a specific disc ........................... 13
To play a track you want to hear ................................... 13
To repeat playback ........................................................ 13
To playback tracks/discs at random .............................. 14
To store your favorite tracks ......................................... 16
To scan quickly through tracks on a disc ....................... 17
To use the TIME button ................................................ 18
TROUBLESHOOTING ....................................................... 19
SPECIFICATIONS .............................................................. 20
'
D
POWER
HI-LITE
PREVIOUS
BEST
REPEAT
MODE
PGM
CLEAR
1
2
3
TIME
4
5
6
7
8
9
DISC
TRACK
SET
0
SET
-
+
DISC
1
¡
4
¢
7
8
3
RANDOM
FILE-TYPE CD PLAYER
Î
REMOTE CONTROL UNIT
CU-P0090
1
<PRB1268>
En

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer PD-F907

  • Page 1: Table Of Contents

    POWER ON DEMO display mode, press STANDBY/ON and then 4 1 within 1 sec- ond after turning on the power. Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
  • Page 2: Important Safety Instructions

    IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS —...
  • Page 3 [FOR U.S. MODEL] CAUTION ÷ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ÷ The use of optical instruments with this product will increase eye hazard. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4: Before You Use The Player

    CLEAR TIME DISC TRACK – DISC ¡ ¢ RANDOM FILE-TYPE CD PLAYER REMOTE CONTROL UNIT Î CU-P0090 Control cable x 1 Size AA/R6P dry cell batteries x 2 <PRB1268> Immediately access and play your favorite tracks from among the 100 discs loaded in the player.
  • Page 5: Cautions Regarding Handling

    The player's pickup lens should not become dirty in normal use, but if for some reason it should malfunction due to soiling, consult your nearest PIONEER authorized service center. Lens cleaners for CD players are commercially available, but special care should be exer- cised in their use since some may cause damage to the lens.
  • Page 6: Connections

    C System remote control with a Pioneer stereo amplifier that has the Î mark When a Pioneer stereo amplifier bearing the Î mark is used, connect the CONTROL IN jack on the rear panel of the CD player to the CONTROL OUT jack of the amplifier. This will enable the CD player to be controlled using the remote control unit supplied with the stereo amplifier.
  • Page 7: Names Of Parts

    NAMES OF PARTS FRONT PANEL ÷The numbers in parenthesis ( ) are reference pages. Hood Remote sensor P. 8 SINGLE LOADER FILE–TYPE ACCESS button COMPACT DISC PLAYER ◊Û¿X/?≥ Î P. 11 ACSESS SINGLE LOADER PLAY SINGLE LOADER PLAY button POWER STANDBY / ON P.
  • Page 8: Remote Control Operations

    DISC DISC (–/+) buttons ¡ ¢ Track search buttons (4/¢) RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 RANDOM button PLAY button (3) When operating the remote control unit, point the unit's infrared signal transmitter at the remote control receiver (Remote Sensor) on the front panel of the player.
  • Page 9: How To Load The Discs

    HOW TO LOAD THE DISCS Loading discs into the rack ÷ You can load up to 100 discs in the rack. The numbers marked on the rack are used as the disc numbers. These are marked in the clockwise order from 1 to 100. ÷...
  • Page 10: Basic Operations

    DISC SET TRACK SET – DISC 1/¡ 4/¢ ¡ ¢ RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 DISC Use the digit buttons to se- lect the disc, then press DISC SET. TRACK Use the digit buttons to se- lect the track, and press TRACK SET.
  • Page 11: Playing A Disc In The Single Loader Slot

    BASIC OPERATIONS Playing a disc in the Single Loader slot Press SINGLE LOADER AC- ACSESS CESS. ÷ The hood will open with the single loader slot located in the front of the unit. Loading the disc into the Sin- gle Loader slot with the la- bel side (printed surface) fac- ing to the left.
  • Page 12: Various Operations

    MODE CLEAR TIME DISC TRACK – DISC DISC (–/+) ¡ ¢ RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 Press MODE to select CUS- TOM and press 3. Playback starts from the lowest disc No. DISC TRACK CUSTOM no dISC” will be displayed for approximately...
  • Page 13: To Start Playback From A Specific Disc

    DISC TRACK DISC (–/+) – DISC 4 ¢ ¡ ¢ RANDOM FILE-TYPE CD PLAYER REMOTE CONTROL UNIT Î CU-P0090 Press the REPEAT button during playback. Each time you press the button, the repeat mode changes as follows. One track repeat...
  • Page 14: To Playback Tracks/Discs At Random

    ÷ If you press MODE during random play, random play is switched to the ALL or SINGLE play. POWER HI-LITE PREVIOUS BEST REPEAT MODE CLEAR TIME DISC TRACK – DISC ¡ ¢ RANDOM RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090...
  • Page 15: To Program Tracks/Discs In A Desired Order

    TIME DISC TRACK – DISC ¡ ¢ RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 Operation example: Programming disc 2, track 7 as step 1, and disc 5, track 3 as step 2. Press PGM (PROGRAM) dur- ing stop mode.
  • Page 16: To Store Your Favorite Tracks

    CLEAR TIME DISC TRACK – DISC ¡ ¢ RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 Press the PREVIOUS but- ton. ÷ Approximately 10 seconds from one minute into the first track of each disc is played back, starting...
  • Page 17: To Scan Quickly Through Tracks On A Disc

    CLEAR TIME DISC TRACK – DISC ¡ ¢ RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 Press 3 (or 6 ) when you reach the track you want to hear. HI-LITE scan is canceled and normal play resumes. ÷ To cancel HI-LITE scan, press 7.
  • Page 18: To Use The Time Button

    MODE CLEAR TIME DISC TRACK – DISC ¡ ¢ RANDOM FILE-TYPE CD PLAYER Î REMOTE CONTROL UNIT CU-P0090 To use the TIME button Press TIME during play- TIME back. Each time you press TIME, the display changes as follows. Disc number, Track number and Elapsed Time.
  • Page 19: Troubleshooting

    Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.
  • Page 20: Specifications

    P.O. BOX 1540, Long Beach, California 90801-1540 PIONEER ELECTRONICS OF CANADA, INC. PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. <PRB1268> <98A00ZF0Z00> 3. Output terminal Audio line output...

This manual is also suitable for:

Pd-f908

Table of Contents