Installing Topcon Software; Installing Tru - Topcon HiPer II Operator's Manual

Pre-survey Preparation

Installing Topcon Software

The GPS+ Software CD includes the TRU (Topcon Receiver Utility)
software. If installing TRU from the GPS+ Software CD, insert the
CD into the computer's CD/DVD-ROM drive. If downloading TRU
from the website, extract the program's files into a folder on the hard
drive.
The following sections describe installing this software, and other
sections throughout the manual describe using this software with the
HiPer II receiver.

Installing TRU

TRU is a Windows® software application designed for configuring
GNSS receivers.
Computer requirements for TRU are: Microsoft® Windows XP/
Vista/7 operating system and an RS-232C port or computer with
Bluetooth wireless technology. Use TRU to correctly configure the
receiver.
To install TRU:
1. Navigate to the TRU folder, and double-click TRU.zip.
2. Extract TRU.exe to the TRU folder.
3. Double-click TRU.exe to run the installer, and then follow the
on-screen instructions.
After installation, shortcuts appear on the desktop and in the TRU
menu.
Figure 2-1. TRU Desktop Shortcut
HiPer II Operator's Manual
2-2