Pre-Survey Preparation - Topcon HiPer II Operator's Manual

Pre-survey
Preparation
Before beginning to survey with the HiPer II receiver, install the
following software, charge the battery, and apply the following
configurations:
Install receiver configuration software
See "Installing Topcon Software" on page 2-2.
Optional: install SD/SDHC card and/or SIM card
See "Install the Optional SD/SDHC and SIM Cards" on page 2-3.
Charge the Battery
See "Charge and Insert the Battery" on page 2-3.
Configure the Bluetooth wireless technology module
See "Establishing a Wireless Connection" on page 2-5.
Collect almanacs and ephemerides (after first-time configuration
activities as described in Chapter 3)
See "Collecting Almanacs and Ephemerides" on page 2-7.
This chapter also discusses connecting the receiver to a computer.
P/N 7010-0982
Chapter 2
2-1