Technical Documents; Using Topcon Software With Your Receiver - Topcon GR-5 Operator's Manual

Technical Documents

The GR 5 Manual CD includes two manuals (listed below) that help you set up and use your new receiver quickly and efficiently.
•
GR 5 Operator's Manual – An on screen help document that contains detailed information on how to use your new
receiver.
•
Topcon Receiver Utility (TRU) Reference Guide – An on screen help document that contains detailed information on how
to use the TRU software included on the GPS+ Software CD. For more information about the TRU software, see "Using
Topcon Software With Your Receiver".

Using Topcon Software With Your Receiver

Use the GR 5 receiver in conjunction with the Topcon Receiver Utility (TRU) and MAGNET Field™ or Pocket 3D applications for
a precision positioning solution. Topcon software enables you to configure the receiver and other external devices, manage files,
collect data, and perform survey and construction work flows.
The Topcon Receiver Utility (TRU) is a hardware configuration software for receivers and peripheral devices. You can install it on
desktop computers and data controllers. This program is provided on the GPS+ Software CD that accompanied your receiver. A
TRU help document is provided on the GR 5 CD.
Topcon's MAGNET Field™ software for data controllers provides real time communication, cloud storage, data collection and
exchange, and field solutions, such as topo, staking, roads, calculations, and more. Contact your Topcon dealer for more
information about MAGNET Field and the entire MAGNET Enterprise system.
Pocket 3D is a program that runs on data controllers with Windows CE® and mobile platforms. Pocket 3D simplifies data
collection, allowing you to check cuts and fills, layout points and survey all or part of the job site quickly and efficiently. Contact
your Topcon dealer for more information about Pocket 3D.
Technical Documents
P/N: 7010 1004 5