Using Topcon Software With Your Receiver - Topcon HiPer V Operator's Manual

•
HiPer V Quick Start Guide – An on‐screen help guide that contains instructions for quickly setting up your new receiver
and begin using it.
•
Topcon Receiver Utility (TRU) Reference Guide – An on‐screen help document that contains detailed information on how
to use the TRU software included on the GPS+ Software CD. For more information about the TRU software, see "Using
Topcon Software With Your Receiver".

Using Topcon Software With Your Receiver

Use the HiPer V receiver in conjunction with the Topcon Receiver Utility (TRU) and MAGNET Field™ or Pocket‐3D applications.
Topcon software enables you to configure the receiver and other external devices, manage files, collect data, and perform survey
and construction work flows.
TRU is a hardware configuration software for receivers and peripheral devices. You can install it on desktop computers and data
controllers. This program is provided on the GPS+ Software CD that accompanied your receiver. A TRU help document is provided
on the HiPer V CD.
Topcon's MAGNET Field™ software for data controllers provides real‐time communication, cloud storage, data collection and
exchange, and field solutions, such as topo, staking, roads, calculations, and more.
Pocket‐3D is a program that runs on data controllers with Windows platforms. Pocket‐3D simplifies data collection, allowing you
to check cuts and fills, layout points and survey all or part of the job site quickly and efficiently.
Contact your Topcon dealer for more information about Topcon software or the HiPer V receiver system.
Using Topcon Software With Your Receiver
P/N: 1001608‐01 5