Installing Topcon Software; Installing Pc-Cdu - Topcon HiPer Ga Operator's Manual

Pre-survey Preparation

Installing Topcon Software

The Topcon GPS+ CD includes the following software programs used
for configuring and maintaining the receiver. This software is also
available on the TPS website at www.topconpositioning.com to
registered users.
• PC-CDU Lite
ver. 2.1.15 or newer
• Modem-TPS
ver. 2.2p2 or newer
If installing the program(s) from the GPS+ CD, insert the CD into the
computer's CD-ROM drive. If downloading the program(s) from the
website, extract the program's files into a folder on the hard drive.
The following sections describe installing this software, and other
sections throughout the manual describe using this software with the
receiver.

Installing PC-CDU

PC-CDU™ is a comprehensive Windows® software product
designed for controlling GPS+ receivers developed by Topcon
Positioning Systems. PC-CDU uses the GPS Receiver Interface
Language (GRIL) to configure various receiver settings and diagnose
receiver performance.
The PC-CDU software exists in two versions: a full-functionality
version called PC-CDU MS and a reduced-functionality version
called PC-CDU Lite. PC-CDU Lite is available for free on the Topcon
website (www.topconpositioning.com) or the GPS+ CD.
Computer requirements for PC-CDU are: Windows® 98 or newer and
an RS-232C or USB port, or Bluetooth capable. Use PC-CDU version
2.1.15 or newer to correctly configure the receiver.
Refer to the PC-CDU Reference Manual for full
NOTICE
details on installing and using PC-CDU.
2-2
• BTCONF
ver. 1.3 or newer
• FLoader
ver 1.0.07 or newer
HiPer Ga/Gb Operator's Manual