Installing Topcon Software; Installing Pc-Cdu - Topcon GR-5 Operator's Manual

Pre-survey Preparation

Installing Topcon Software

The Topcon GPS+ CD includes the following software programs
used for configuring and maintaining the receiver. This software is
also available on the TPS website to registered users.
• PC-CDU Lite ver. 7.12 or newer
• TRU ver. 2.2 or newer
If installing the program(s) from the GPS+ CD, insert the CD into the
computer's CD-ROM drive. If downloading the program(s) from the
website, extract the program's files into a folder on the hard drive.
The following sections describe installing this software, and other
sections throughout the manual describe using this software with the
receiver.

Installing PC-CDU

PC-CDU™ is a comprehensive Windows® software product
designed for controlling GNSS receivers developed by Topcon
Positioning Systems. PC-CDU uses the GPS Receiver Interface
Language (GRIL) to configure various receiver settings and diagnose
receiver performance.
The PC-CDU software exists in two versions: a full-functionality
version called PC-CDU MS and a reduced-functionality version
called PC-CDU Lite. PC-CDU Lite is available for free on the
Topcon website or the GPS+ CD.
Computer requirements for PC-CDU are: Windows® 98 or newer
and an RS-232C or USB port, or Bluetooth capable. Use PC-CDU
version 7.12 or newer to correctly configure the receiver.
NOTICE
2-2
Refer to the PC-CDU Reference Manual for full
details on installing and using PC-CDU.
GR-5 Operator's Manual