Using Tru To Clear The Nvram - Topcon HiPer II Operator's Manual

can eliminate communication or tracking problems. Clearing the
receiver's NVRAM can be interpreted as a "soft boot" in the
computer.
After clearing the NVRAM, the receiver requires time to collect new
ephemerides and almanacs (around 15 minutes).
Clearing the receiver's NVRAM will not delete any files already
recorded in the receiver's memory. However, it will reset the receiver
to factory default values.
In addition, the NVRAM keeps information about the receiver file
system.

Using TRU to Clear the NVRAM

1. Connect the receiver and computer. Open TRU. See "Connecting
to the Receiver using TRU" on page 2-3 for this procedure.
2. Click
allows the user to reset the receiver and to clear the NVRAM
3. Click the Clear NVRAM button and click Yes button to continue
this procedure.
P/N 7010-0982
icon in the main window. The Tools dialog box
Figure 5-11. Tools Dialog Box
Clearing the NVRAM
5-9