Chapter 5
Receiver and File
Maintenance
When post-processing the data after completing a survey, the data in
the receiver's memory needs to be downloaded to a computer.
Downloading and deleting files prepares the receiver's memory for
the next survey. Occasionally, the receiver's NVRAM may need to be
cleared to eliminate communication or tracking problems.
As project expectations expand, the receiver's OAF may need to be
updated to provide expanded operation and functionality. The various
boards inside the receiver (GPS, power, modem, and Bluetooth)
require firmware to properly operate and provide appropriate
functionality. As Topcon releases firmware updates, loading these
updates into the receiver will ensure the receiver operates at its full
potential.
Downloading Files to a
Computer
Downloading Files via TRU
TRU allows for downloading files to a computer and to also delete
files from the receiver.
1. Connect the receiver to a computer. Open TRU. See "Connecting
to the Receiver using TRU" on page 2-3 for this procedure.
P/N 7010-0982
5-1