Using Topcon Software With Your Receiver - Topcon HiPer SR Operator's Manual

Using Topcon Software With Your Receiver

Use the HiPer SR receiver in conjunction with the Topcon Receiver Utility (TRU) and MAGNET Field™ or Pocket‐3D applications
for a cable‐free positioning solution. Topcon software enables you to configure the receiver and other external devices, manage
files, collect data, and perform survey and construction work flows.
The Topcon Receiver Utility (TRU) is a hardware configuration software for receivers and peripheral devices. You can install it on
desktop computers and data controllers. This program is provided on the GPS+ Software CD that accompanied your receiver. A
TRU help document is provided on the HiPer SR CD.
Topcon's MAGNET Field™ software for data controllers provides real‐time communication, cloud storage, data collection and
exchange, and field solutions, such as topo, staking, roads, calculations, and more. Contact your Topcon dealer for more
information about MAGNET Field and the entire MAGNET Enterprise system.
Pocket‐3D is a program that runs on data controllers with Windows CE® and mobile platforms. Pocket‐3D simplifies data
collection, allowing you to check cuts and fills, layout points and survey all or part of the job site quickly and efficiently. Contact
your Topcon dealer for more information about Pocket‐3D.
Magnet Relay™ is a GNSS correction service hosted by the MAGNET Solution. With a subscription to MAGNET Relay, you can
connect the HiPer SR Cellular receiver to the Relay service (via a cellular connection) and use it as a Base for up to 10 Rovers.
Using Topcon Software With Your Receiver
P/N: 1000737‐01 6