Tx Start Speed - Kyocera ECOSYS M2530dn Operation Manual

TX Start Speed

When communication conditions are bad, the fax may not be transmitted correctly. In that case, set a lower TX Start
Speed.
Normally this should be used with the default setting.
1
Press the System Menu/Counter key.
2
Press the  or  key to select [FAX].
3
Press the OK key.
4
Press the  or  key to select [Transmission].
5
Press the OK key.
6
Press the  or  key to select [TX Start Speed].
7
Press the OK key.
8
Press the  or  key to select [9600bps], [14400bps] or
[33600bps].
9
Press the OK key.
6-11
Setup and Registration
6