Printing Administrative Reports; Send Result Reports - Kyocera ECOSYS M2530dn Operation Manual

Printing Administrative Reports

You can print various administrative reports to check the results of fax transmission or the status of the functional
setup.

Send Result Reports

Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print
the transmitted image in the send result report.
FAX:
1 *Off
*********************
2 On
3
Error Only
Checking Transmission Results and Registration Status
1
Press the System Menu/Counter key.
2
Press the  or  key to select [Report].
3
Press the OK key.
4
Press the  or  key to select [Result Rpt Set.].
5
Press the OK key.
6
Press the  or  key to select [Send Result].
7
Press the OK key.
8
Press the  or  key to select [FAX].
9
Press the OK key.
10
Press the  or  key to select [Off] (not to print), [On]
a b
(to print), [Error Only] or [Specify Each Job].
11
Press the OK key. Proceed to the next step if you
selected [On], [Error Only] or [Specify Each Job] in step
10.
12
Press the  or  key to select [Off] (do not print
transmitted image), [Partial Image] (print transmitted
image at full size) or [Full Image] (print all of the
transmitted image) for attachment of the transmitted
image.
5-5
5