Fax Dialing Mode; Ecm Tx; Tx Start Speed - Kyocera Triumph-Adler P-C2155w Operation Manual

Before Using the Fax Machine > Local FAX Information Entry

FAX Dialing Mode

Select the dialing mode according to the line type.
1
2

ECM TX

Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and other conditions.
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than when [Off] is selected.
1
2

TX Start Speed

Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
NOTE
Normally this should be used with the default setting.
1
2
NOTE
This setting does not appear in some regions.
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[Transmission] > [OK] key > [▲] [▼] key > [FAX Dialing Mode] > [OK] key
Set the FAX Dialing Mode.
[Tone(DTMF)] or [Pulse(10pps)] > [OK] key
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[Transmission] > [OK] key > [▲] [▼] key > [ECM TX] > [OK] key
Configure the settings.
[On] or [Off] > [OK] key
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[Transmission] > [OK] key > [▲] [▼] key > [TX Start Speed] > [OK] key
Configure the settings.
[9600bps], [14400bps] or [33600bps] > [OK] key
2-10