Settings for Memory Forwarding from Command Center RX (Forward)
You can use Command Center RX on a computer connected to the network to specify the memory forwarding settings
on this machine.
Refer to the machine's Operation Guide for information on the network settings.
NOTE:
To fully access the features of the Command Center RX pages, enter the User Name and Password and
click [Login]. Entering the predefined administrator password allows the user to access all pages, including
Document Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user
with administrator privileges is shown below.
Login User Name
Login Password
* Upper case and lower case letters are distinguished (case sensitive).
Accessing Command Center RX
Admin
Admin
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP
address or the host name.
Examples:
https://10.180.81.1/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the
machine and Command Center RX as well as their
current status.
NOTE:
If the screen "There is a problem with this website's
security certificate." is displayed, configure the certificate.
For details on Certificates, refer to the Command Center
RX User Guide.
You can also continue the operation without configuring the
certificate.
3
Select a category from the navigation bar on the left to
view and set values for that particular category.
4-21
FAX Operation (Advanced)
4